For the Incoming Interface field under the 'Criteria' select GE4 (this is the internal interface the device is connected to on the router).Now that the address object has been created, we can create the BWM rule to prioritize all traffic from the device. Go to Configuration( ) → Object → Address/Geo IP and click the Add button to insert the IP address entry for the device. To allow a specific device priority based on its IP address we must first create the address object. Once you have created the object for the service port you can create the BWM rule to use prioritize this port. Go to Configuration( ) → Object → Service and click the Add button to insert and object for proprietary port number. If you are using a proprietary service port, you will need to first create the service port object. Scroll down to the 'Bandwidth Shaping' option and set the Priority to 1 (highest priority).Under the 'Criteria' option(s) for the BWM rule scroll down to the Service Object option and select SIP.To create a bandwidth management rule allowing VoIP traffic priority, click the Add button. All other traffic will have a priority of 7 based on the default BWM rule. Check the box to enable the bandwidth management ( Enable BWM) feature and apply the settings.Īll rules created by user will have a higher priority, depending on user configuration. Login to the router's web configuration page and go to menu, Configuration( ) → BWM. The Zyxel routers can only prioritize outgoing internet traffic they cannot prioritize incoming internet traffic. This guide will provide instructions on creating a QoS rule to prioritize VoIP as well as prioritizing traffic for specific device(s). One of the main reasons users enable bandwidth management (QoS) is to prioritize VoIP traffic. This guide will provide two scenarios for setting up QoS.

Atp100